TECHNICAL BUYER GUIDE

Capability and evidence register

A shared reference for product scope. Unverified means a suitable, approved evidence record is missing; it is not a statement that a feature can never be supplied.

Reviewed 2026-10-03. States: available = evidenced for a defined configuration; limited pilot = demonstrated on a recorded scene or one installation under stated conditions, not yet for a defined configuration; planned = approved roadmap, not purchasable today; unverified = no sufficient record attached.

Do not interpret a listed evaluation area as an available product claim.
Capability	State	Scope and evidence needed	Evidence on file
PPE check — bare hands on a line camera	limited pilot	One PPE class (gloves) on an existing overhead line camera; confidence shown per detection so a supervisor can judge the low ones. To reach available: the PPE classes for a site agreed at assessment, and an acceptance test on that site's own cameras.	14 s recording, burned-in overlay 01-04-2023 16:57, conditions and limits stated
Object count across a line at a loading bay	limited pilot	A known item type counted once each as it crosses one configured line on an existing dock camera. Not an inventory system; does not reconcile against a ledger. To reach available: the item type and line position agreed at assessment, and a count checked against a manual tally at the site.	16 s recording, 19 December 2022, third-party identifiers blurred
Number-plate camera, fitted and operated	limited pilot	The camera as fitted to a gate pillar and the console the operator works from. The photographs prove a fitting and a working console, not a read rate. To reach available: plate reads logged against the gate register at a site, with mounting height, approach angle and lighting recorded.	Two site photographs, mounting ~1.5 m, daylight
Hot work beside flammable material	limited pilot	Two classes — a hot-work activity and a flammable-material store — detected in the same frame on one fixed camera, in PGAK's own test setup. To reach available: the same two classes on a customer's own camera, with camera model, distance and confidence recorded.	11 s recording, PGAK test setup; camera details pending
Perimeter events	unverified	Evaluate configured zones and operating hours on a representative feed. A dated demonstration, approved configuration and site acceptance test.	none yet
Attendance exceptions	unverified	Evaluate enrolled-person events and human review of missing or ambiguous records. Authorised enrolment, retention policy, suitable views and correction workflow.	none yet
Camera-feed health	unverified	Evaluate interruption detection and the response process for an unavailable stream. Disconnect/reconnect tests and a verified notification destination.	none yet
Face recognition	unverified	Site-specific evaluation of enrolled people; never automatic proof of identity or misconduct. Permissioned test set, false matches and missed matches, documented human review.	none yet
Loitering	unverified	Evaluate presence over a defined duration in a selected zone. Queue, occlusion and legitimate-worker scenarios in the acceptance test.	none yet
Full video management system	unverified	PGAK is presented here as an analytics layer; replacement recording, playback and retention are not established. Recording, search/playback, export, retention, roles, audit and recovery evidence.	none yet

Other capabilities in the educational feature library remain unverified until added here with approved evidence. No measured accuracy, latency, uptime or certification is established by this list.

Estimate the effort these would change at your site

Three of the capabilities above have their own calculator scenario. Each uses your measurements, reports staff time separately from cash, and states the evidence it rests on.

Calculator · C29

Sack and object counting: estimate it for your site

Use your own measurements. The result is the staff time released, shown separately from any cash, using the formula below. It runs in your browser and nothing is sent anywhere.

Fields start empty. A blank is “not entered”, not zero; type 0 where 0 is true.

Batches per month (per month)

Old reconciliation minutes per batch (minutes)

Assisted reconciliation minutes per batch (minutes)

Exception hours per month (hours per month)

Money (optional)

Loaded hourly cost of the staff whose time is released (₹ per hour)

Salary plus benefits and overheads, per working hour. Needed only if you enter a realisation above 0%.

Realisation: share of released hours that becomes cash (%)

0% unless you can name the mechanism — overtime that stops, a post not refilled, a contract reduced.

Other cash change you can evidence (optional) (₹ per month)

Only from your own records. May be negative.

Recurring incremental cost (₹ per month)

Licences, support, connectivity. Enter 0 if there is none.

One-off setup capital (₹)

Hardware, installation, commissioning. Enter 0 if there is none.

Enter every amount on the same basis — all including GST or all excluding it. Nothing here adds or removes tax. Values are nominal rupees, not discounted.

Result

Enter your own figures, or load the worked example, to see the result.

How it is calculated

hours = batches × (old − assisted) ÷ 60 − exception hours

Worked example (illustrative inputs)

120 batches; 10 old; 3 new; 2 exception hours.

staff time released: 12 hours a month.

Formula version 1.0.0.

What this does not tell you

Hours released are capacity, not cash. They become cash only through a mechanism you state — overtime that stops, a post that is not refilled — entered as the realisation fraction.
The 'after' values are your assumptions or pilot measurements. PGAK publishes no effectiveness figure for this feature.
A video count is not a certified weighing or stock system; reconcile against your own records.

Evidence status: Limited public demonstration; no measured savings verified.

Calculator · C30

Hot-work monitoring: estimate it for your site

Use your own measurements. The result is the staff time released, shown separately from any cash, using the formula below. It runs in your browser and nothing is sent anywhere.

Fields start empty. A blank is “not entered”, not zero; type 0 where 0 is true.

Permit reviews per month (per month)

Old review minutes per permit (minutes)

Assisted review minutes per permit (minutes)

Human follow-up hours per month (hours per month)

Money (optional)

Loaded hourly cost of the staff whose time is released (₹ per hour)

Salary plus benefits and overheads, per working hour. Needed only if you enter a realisation above 0%.

Realisation: share of released hours that becomes cash (%)

0% unless you can name the mechanism — overtime that stops, a post not refilled, a contract reduced.

Other cash change you can evidence (optional) (₹ per month)

Only from your own records. May be negative.

Recurring incremental cost (₹ per month)

Licences, support, connectivity. Enter 0 if there is none.

One-off setup capital (₹)

Hardware, installation, commissioning. Enter 0 if there is none.

Enter every amount on the same basis — all including GST or all excluding it. Nothing here adds or removes tax. Values are nominal rupees, not discounted.

Result

Enter your own figures, or load the worked example, to see the result.

How it is calculated

hours = permits × (old − assisted) ÷ 60 − follow-up hours

Worked example (illustrative inputs)

80 reviews; 8 old; 3 new; 2 follow-up hours.

staff time released: 4.667 hours a month.

Formula version 1.0.0.

What this does not tell you

Hours released are capacity, not cash. They become cash only through a mechanism you state — overtime that stops, a post that is not refilled — entered as the realisation fraction.
The 'after' values are your assumptions or pilot measurements. PGAK publishes no effectiveness figure for this feature.
This estimates review effort only. It does not value injuries or lives, does not promise that any incident is prevented, and is not a replacement for certified alarms, required guards or supervision.

Evidence status: Limited public demonstration; no measured savings verified.

Calculator · C31

Camera health and recording checks: estimate it for your site

Use your own measurements. The result is the staff time released, shown separately from any cash, using the formula below. It runs in your browser and nothing is sent anywhere.

Fields start empty. A blank is “not entered”, not zero; type 0 where 0 is true.

Cameras (number)

Manual checks per camera per month (per month)

Minutes per manual check (minutes)

Automated exception-review hours per month (hours per month)

Money (optional)

Loaded hourly cost of the staff whose time is released (₹ per hour)

Salary plus benefits and overheads, per working hour. Needed only if you enter a realisation above 0%.

Realisation: share of released hours that becomes cash (%)

0% unless you can name the mechanism — overtime that stops, a post not refilled, a contract reduced.

Other cash change you can evidence (optional) (₹ per month)

Only from your own records. May be negative.

Recurring incremental cost (₹ per month)

Licences, support, connectivity. Enter 0 if there is none.

One-off setup capital (₹)

Hardware, installation, commissioning. Enter 0 if there is none.

Enter every amount on the same basis — all including GST or all excluding it. Nothing here adds or removes tax. Values are nominal rupees, not discounted.

Result

Enter your own figures, or load the worked example, to see the result.

How it is calculated

hours = cameras × checks × manual minutes ÷ 60 − exception-review hours

Worked example (illustrative inputs)

32 cameras; 26 checks; 0.5 minutes; 2 exception hours.

staff time released: 4.933 hours a month.

Formula version 1.0.0.

What this does not tell you

Hours released are capacity, not cash. They become cash only through a mechanism you state — overtime that stops, a post that is not refilled — entered as the realisation fraction.
The 'after' values are your assumptions or pilot measurements. PGAK publishes no effectiveness figure for this feature.

Evidence status: Supplier/integration or marketed capability; PGAK availability and site performance require verification.

Request a site-specific assessment with these assumptions

Your result stays on this page either way. If you want it checked against your cameras and quotation, leave a number; mention the figures on the call. Nothing you typed into the calculator is sent with this form.